Specification

• Temperature Range:Operating: Operating: +0°C ~ +40°C on full load Storage & Shipping: -40°C ~ +70°C
• Humidity: 5-85% on operating, 5-95% on storage
• Dielectric Withstand: Primary to frame ground 1800VAC for 1 second
• Efficiency: 87% minimum, typical up to 90%
• Rise Time: Less than 20ms
• Hold-Up Time : 17ms minimum at nominal input voltage
• Power Good Signal :Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
• Leakage Current: Less than 3.5mA at 264Vac, 50Hz
• MTBF: 100,000 hours on maximum load at +25°C
• Dimensions (LxWxH):140x150x85.8mm / 5.5x5.9x3.4inch

Features:

• Complied with ATX12V / EPS12V standard
• Active Power Factor Correction Meeting with EN61000-3-2
• High efficiency and reliability
• Compatible with European Union Directive 2002/95/EC(Restriction on Hazardous Substances).
• Remote ON/OFF function
• Noise Killer (thermal fan speed control function)
• Low noise and ripple
• Internal 12V DC fan included
• Output over voltage, short circuit, and over current protection
• 100% Hi-pot, ATE, and burn-in tested
• Re-settable power shut down
• Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
• Approved by CUL/UL60950-1, TUV EN60950-1,CB 60950-1 report, FCC, EMC

Input Characteristics

• Input Range: 90 ~ 264Vac (RMS), Full Range Input
• Frequency: 47 ~ 63Hz
• Input Current: Max 6A @ 115Vac, 3A@ 230Vac
• Inrush Current: No damage

Output Characteristics

 

Output Voltage	Min Load	Normal Load	Max Load	Load Reg.	Line Reg.	Ripple & Noise
+3.3V	0.1A	12A	26/6A	± 5%	± 1%	50mV P-P
+5V	0.2A	12A	12.8/26A	± 5%	± 1%	50mV P-P
+12V1	0.1A	8A	18A	± 5%	± 1%	120mV P-P
+12V2	0A	8A	18A	± 5%	± 1%	120mV P-P
+12V3	0A	8A	18A	± 5%	± 1%	120mV P-P
+12V4	0A	8A	18A	± 5%	± 1%	120mV P-P
-12V	0A	0.25A	0.5A	± 10%	± 2%	200mV P-P
+5Vsb	0A	1.5A	3.5A	± 5%	± 1%	50mV P-P

* +12V1,2,3,4 Peak current is 20A (less than 10mS)
* +5Vsb peak current is 4A (less than 0.5S)
* +3.3V & +5V total output does not exceed 150W
   when +5V is loaded to 26A, then +3.3V maximum load is 6A
   when +3.3V is loaded to 26A, then +5V maximum load is 12.8A
*  +12V1 & +12V2 & +12V3 & +12V4 total output does not exceed 600W(50A)

Dimension: 140x150x85.8mm / 5.5x5.9x3.4inch
Storage temp.: -40°C ~ +70°C
Operating temp.: 0°C ~ +40°C on full load
MTBF: 100,000 hours on maximum load at +25°C
Weight (lbs): 6.00

DM Magna Gold Series
Datasheet

There are no accessories for this product at this time.