OVERVIEW
Proudly presented by Enhance Technology, the EnhanceBox X4 Multi-lane system is a PCI HBA dependent portable desktop storage system that wraps four (4) high capacity SATA disks in one enclosure, while connecting to the host system via one Infiniband 4X external cable. After connecting to the host controller, the X4 system can be configured as RAID 1, RAID 0, RAID 1+0, RAID 1+S, RAID 5 or as 4 individual drives (JBOD), and deliver an outstanding 200MB/s sustained throughput.
The EnhanceRAID system was built on the world-known hybrid I/O technology, the SATALink™, a iSCSI-to-SATA converging technology pioneered by Enhance Technology to bring low-cost SATA disks to the broadband high performance computing environments. The SATALink™ hybrid I/O technology has enabled Enhance Technology to offer more cost/effective storage solutions to the storage industry.
The Application
- For JBOD or RAID (depending on PCI HBA Card)
- Data Protection or Disk-to-Disk Backup
- Digital Video Recording (DVR)
- Security and Digital Surveillance
- Video Editing (DV, SD or HD)
- Desktop Publishing
Specification
Form Factor : Compact 4-Drive Tower
Host Interface : 4 X eSATA
Disk Interface: SATA II 3GB
External Calble : 4 X eSATA Cable
Number of Disks : Supported Up to 4
Power Supply : Single 80Watt
AC Input : 100-240V ~2A 47~63Hz
Performance : Upto 200 MB/sec
Output : +12V/5A +5V/5A
The BUS
The EnhanceBox X4 ML (Multi-lane) system is compatible with all major brand of Host Bus Adaptor (HBA), providing the best connectivity and reliability that maximizes the storage system performance.
A Short List of qualified HBA (Multi-Lane Connection) Venders:
- AMCC/3ware
- Adaptec
- LSI Logic
The Cable
The optional external cable for the EnhanceBox X4 ML (Multi-lane) system is a 1 meter Infiniband 4X cable deploy the latest Multi-lane connector with latch type of connector providing more secured cable connection, improved durability, increased EMI protection and up to 2 meters cable length. (Note: There are two type of Multi-lane connectors: Latch type and Thumbscrew type. Please verify with your HBA vender to ensure matching type of connector on the HBA.)
- Latch to Latch (HBA)
- Latch to Thumbscrew (HBA)
Storage temp.: -10°c~50°c
Operating temp.: 10°c~35°c
Weight (lbs): 0.00
There are no accessories for this product at this time.