Specifications

Output Voltage Output Current Min. Output Current Max. Output Current Peak Regulation Load Regulation Line Output Ripple & Noise Max.[P-P] 5V 3 25.00 ± 5% ± 1% 50mV

12V 2 40.00 ± 5% ± 1% 120mV

-5V 0 0.50 ± 5% ± 1% 120mV

-12V 0 0.50 ± 5% ± 1% 120mV

3.3V 1 20 ± 5% ± 1% 50mV

+5VSB 0.1 20 ± 5% ± 1% 50mV

Features

* TEMPERATURE RANGE：OPERATING 0℃～40℃
* HOLD UP TIME：16mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE
* DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND
* EFFICIENCY：65% TYPICAL，AT FULL LOAD
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS
* OVERLOAD PROTECTION：110～150% MAX
* OVER VOLTAGE PROTECTION：+5V→5.7V～6.5V , +3.3V→3.7V～4.1V , +12V→13.3V~14.3V
* SHORT CIRCUIT PROTECTION：+5V、-5V、+12V、-12V、+3.3V
* EMI NOISE FILTER : FCC CLASS B, CISPR22 CLASS B
* SAFETY : UL 1950, CSA 22.2 NO 950, TUV IEC 950
* REMOTE ON/OFF CONTROL
THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY).
AS LOGIC LEVEL IS LOW，OUTPUTS VOLTAGE WERE ENABLE， AS LOGIC LEVEL IS HIGH，OUTPUTS VOLTAGE WERE DISABLE.
* 3.3V / 5V REMOTE SENSING
* COOLING : TWO 40mm DC FANS
* MEET IEC-1000-3-2 CLASS D

Dimension: 225(D)x100(W)x40.5(H)mm
Input Voltage: 95 ~ 264 VAC FULL RANGE
Connectors: EPS-12V
Weight (lbs): 6.00

There are no accessories for this product at this time.