Specifications

Output Voltage Output Current Min. Output Current Max. Output Current Peak Regulation Load Regulation Line Output Ripple & Noise Max.[P-P] 5V 3 35 ± 5% ± 50mV 50mV

12V 2 22 ± 5% ± 120mV 100mV

-5V 0.1 0.50 ± 10% ± 120mV 150mV

-12V 0.1 0.8 ± 10% ± 120mV 150mV

3.3V 1 20 ± 5% ± 50mV 50mV

+5VSB 0.1 2 ± 5% ± 50mV 50mV

Features

* TEMPERATURE RANGE: OPERATING: -10℃ --- 40℃(-36V ~-72VDC INPUT)
-10℃ --- 50℃(-46V~-72VDC INPUT) STORAGE: -20℃ --- 80℃ * HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
* REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
* HOLD UP TIME: 1.6 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
* DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND
* EFFICIENCY: 65% TYPICAL AT -48VDC FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110% ~ 160%
OVER VOLTAGE PROTECTION: +5V → 5.7V ~ 6.7V, 3.3V → 3.7V ~ 4.7V +12V → 13.0V ~ 15.0V OVER CURRENT PROTECTION: 110% ~ 150%
* SHORT CIRCUIT PROTECTION: +5V, -5V, +12V, -12V, +3.3V, +5VSB
* EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A
* SAFETY: UL 1950, CSA 22.2 NO/ 950, TÜV IEC 950
* REMOTE ON / OFF CONTROL
THE UNIT SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE / ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STANDBY), AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE, AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABLE.
* 3.3V / 5V REMOTE SENSING
* CONNECTOR POWER INPUT
A. POSITRONIC: PLB06M CONNECTOR
B. TERMINAL BLOCK

Connectors: EPS-12 (ATX-12 OPTIONAL)
Weight (lbs): 20.00

There are no accessories for this product at this time.