Specifications

INPUT CHARACTERISTICS: VOLTAGE: 90 ~ 265 VAC FULL RANGE FREQUENCY: 47 ~ 63 HZ INPUT CURRENT: 8.0 A ( RMS ) FOR 115VAC 4.0 A ( RMS ) FOR 230VAC INRUSH CURRENT: 55.0A MAX. FOR 115 VAC 110.0A MAX. FOR 230 VAC

OUTPUT CHARACTERISTICS:

OUTPUT VOLTAGE	OUTPUT CURRENT		REGULATION		OUTPUT RIPPLE & NOISE MAX. [P-P]
	MIN.[A]	MAX.[A]	LOAD	LINE
+5V	5	33	± 5%	± 1%	60mV
+12V	2.5	32	± 5%	± 1%	100mV
-5V	0.05	0.8	±5%	± 1%	120mV
-12V	0.1	1.0	±5%	± 1%	150mV
+3.3V	1.0	28	± 5%	± 1%	50mV
+5VSB	0.1	2.0	± 5%	± 1%	60mV

REMARKS:

(1) TOTAL CURRENT OF +5V AND +3.3V : 45A

(2) TOTAL OUTPUT POWER NOT EXCEED 460W ***

SPECIFICATION:

TEMPERATURE RANGE: OPERATING 00C --- 400C HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND EFFICIENCY: 70% TYPICAL, AT FULL LOAD POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms OVER LOAD PROTECTION: 130V +/- 20% OVER VOLTAGE PROTECTION: +5V (5.7V ~ 6.5 V), 3.3V (3.9V ~ 4.3V), 12V ( 13.6V~15V) SHORT CIRCUIT PROTECTION: +5V, -5V, +12V, -12V, +3.3V UNDER VOLTAGE PROTECTION : +5V (4.1V ~ 4.5 V), 3.3V (2.69V ~2.97V), 12V (9.8V~10.8V) EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B SAFETY: UL 1950, CSA 22.2 NO/ 950, TUV IEC 950 REMOTE ON / OFF CONTROL THE UNIT SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE / ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STANDBY), AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE, AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABLE. 3.3V / 5V REMOTE SENSING COOLING: ONE 60mm DC FAN DIMENSION: 240 (D) x 100 (W) x 70 (H) mm. MEET IEC-1000-3-2 CLASS D (ACTIVE PFC, PF: 0.98)

Dimension: 240(D)x100(W)x70(H)mm
Connectors: EPS-12V
Weight (lbs): 8.00

There are no accessories for this product at this time.