Specifications

INPUT CHARACTERISTICS: VOLTAGE: 90~264 VAC FULL RANGE FREQUENCY: 47~63 HZ INPUT CURRENT: .9.0 A / 4.5A FOR 115V / 230 VAC INRUSH CURRENT: 35A / 70A FOR 115 V / 230 VAC PER POWER MODULE

OUTPUT CHARACTERISTICS:

OUTPUT VOLTAGE	OUTPUT CURRENT		REGULATION		OUTPUT RIPPLE & NOISE MAX. [P-P]
	MIN(A).	MAX(A)	LOAD	LINE
+5V	6.0	50	± 5%	± 1%	50mV
+12V	3.0	32	± 8%	± 1%	100mV
-5V	0.1	1.0	± 10%	± 1%	120mV
-12V	0.1	1.0	± 10%	± 1%	150mV
+3.3V	2.0	28	± 5%	± 1%	50mV
+5VSB	0.1	3.0	± 5%	± 1%	60mV

REMARKS: 1) THE TOTAL OUTPUT CURRENT OF +5V & +3.3V NOT EXCEEN 50A

2) THE TOTAL OUTPUT POWER NOT EXCEEN 460W

SPECIFICATION:

TEMPERATURE RANGE: OPERATING 00C --- 400C, STORAGE -200C –800C HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND EFFICIENCY: 63% TYPICAL POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms OVER LOAD PROTECTION: 110 ~ 160% MAX. OVER VOLTAGE PROTECTION: +5V (5.7 ~ 6.5V), 3.3V ( 3.9 ~ 4.3V), 12V ( 13.3V ~ 14.3V) DUAL EMI INLET FILTER: MEET FCC CLASS A, CISPR22 CLASS B SAFETY: EACH POWER MODULE MEET UL 1950, CSA 22.2 NO/ 950, TUV IEC 950 REMOTE ON / OFF CONTROL FAULT ALARM METHOD : POWER OK – GREEN LED ON EACH MODULE BUZZER, TTL, SIGNAL (LOW ACTIVE) 2+1, HOT SWAPPABLE / HOT PLUGGABLE REDUNDANCY FUNCTION BALANCED LOAD SHARING DESIGN ON EACH CHANNEL REMOTE SENSING DESIGN ISOLATION : BUILT-IN IN THE POWER MODULE MEET IEC-1000-3-2 CLASS D (ACTIVE PFC) COOLING: THREE 40mm DC FANS (ONE EACH MODULE) AND ONE 40mm DC FAN ON THE REAR SIDE (OPTIONAL) 12C FEATURE (OPTIONAL)