Specifications

INPUT CHARACTERISTICS: VOLTAGE: 95 - 264VAC FULL RANGE FREQUENCY: 47 – 63 Hz. INPUT CURRENT: 9.0A / 5.0A FOR 115 /230 VAC INRUSH CURRENT: 80A / 100A MAX. FOR 115 / 230 VAC PER POWER MODULE

OUTPUT CHARACTERISTICS:

OUTPUT VOLTAGE	OUTPUT CURRENT		OUTPUT VOLTAGE REGULATION		OUTPUT RIPPLE &
	MIN(A).	MAX(A)	LOAD	LINE	NOISE MAX. [P-P]
+5V	3.0	60	±5%	±1%	50mV
+12V	2.0	40	±5%	±1%	120mV
-5V	0.05	1.0	±10%	±1%	120mV
-12V	0.05	1.0	±10%	±1%	150mV
3.3V	1.0	40	±5%	±1%	50mV
+5VSB	0.1	2.5	±5%	±1%	50mV

REMARKS:

(1) TOTAL CURRENT OF +5V AND +3.3V : 70A

(2) TOTAL +5V AND +3.3V AND +12V POWER NOT EXCHEED 620W

SPECIFICATION:

TEMPERATURE RANGE: OPERATING 00C--- 400C, STORAGE –200C ~ 700C HOLD UP TIME: 20 ms MINIMUM AT FULL LOAD & 90 VAC INPUT VOLTAGE DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND EFFICIENCY: 63% TYPICAL,AT FULL LOAD POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms OVER LOAD PROTECTION: 110 ~ 160% MAX. OVER VOLTAGE PROTECTION: +5V (5.7V ~ 6.5V), +3.3V (3.9V ~ 4.3V), +12V (13.3V ~ 14.3V) SHORT CIRCUIT : 5V,12V, 3.3V, AUTO-RECOVERED : 5VSB, -5V, -12V EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B SAFETY: MEET UL 1950, CSA 22.2 NO/ 950, TUV IEC 950 REMOTE ON / OFF CONTROL FAULTY ALARM METHODS : LED, BUZZER, TTL SIGNAL 2+1, HOT-SWAPPABLE / HOT-PLUGGABLE REDUNDANCY FUNCTION N + 1 BALANCE LOAD SHARING DESIGN ON 5/12/3.3V CHANNEL REMOTE SENSING DESIGN ISOLATION: BUILT-IN IN THE POWER MODULE MEET IEC-1000-3-2 CLASS D ( ACTIVE PFC ) DIMENSION: 82(H) X 127(W) X 276/300 (D) mm, 276mm -- W/O REAR DC FAN COOLING : TWO 40 mm DC FANS ( ONE IN EACH MODULE ), ONE 80 mm DC FAN ( REAR SIDE )