Specifications

Output Voltage Output Current Min. Output Current Max. Output Current Peak Regulation Load Regulation Line Output Ripple & Noise Max.[P-P] 5V 0.5 45 ± 5% ± 1% 60mV

12V 2 60 ± 5% ± 1% 120mV

-5V 0 0.8 ± 5% ± 1% 120mV

-12V 0 0.8 ± 5% ± 1% 120mV

3.3V 0.5 30 ± 5% ± 1% 60mV

+5VSB 0 3.5 ± 5% ± 1% 60mV

Features

‧TEMPERATURE RANGE: OPERATING 0℃ --- 50℃
‧HOLD UP TIME: 17mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE
‧DIELECTRIC WITHSTANDING: INPUT/OUTPUT 1500 VAC FOR 1 MINUTE
INPUT TO FRAM GROUND 1500 VAC FOR 1 MINUTE
‧EFFICIENCY: 71% TYPICAL AT FULL LOAD
‧POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
‧OVER LOAD PROTECTION: 130 ±20%
‧OVER VOLTAGE PROTECTION:
+5V à5.7V ~ 6.2V, +3.3V à3.7V ~ 4.1V, +12V à13.3V ~ 14.3V ‧OVER CIRCUIT PROTECTION: 110% ~ 150%
‧EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
‧SAFETY: MEET UL 60950, CSA 60950, TUV EN-60950
‧REMOTE ON / OFF CONTROL
‧THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH
WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY)
AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE
AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABLE
‧COOLING: 8 0mm DC FANS

Dimension: 8.66x5.90x3.39 (inch)
Connectors: EPS-12 (ATX-12 OPTIONAL)
Weight (lbs): 15.00

There are no accessories for this product at this time.