Specification
Temperature Range:
Operating 0° C ~ +35° C on full load; storage & shipping -20° C ~ +80° C
Humidity:
95% on operating and 95% on storage
Dielectric Withstand:
Input to frame ground 1800V AC for 1 second
Efficiency :
68% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
Rise Time :
Less than 20ms
Hold-Up Time :
17ms minimum at nominal input voltage
Power Good Signal :
Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
(TTL and CMOS compatible)
Leakage Currect:
Not exceed 0.75mA at 115V AC, 60Hz
MTBF:
100,000 hours on maximum load at +25°C
Dimensions (LxWxH):
81.5x40.5x150mm/3.2”x1.6”x6” inches
Features
-
Complied with Flex ATX standard
-
Active Power Factor Correction Meeting with EN61000-3-2
-
Remote On/Off function
-
High efficiency and reliability
-
Noise Killer (thermal fan speed control function)
-
Low noise and ripple
-
Internal 12V DC fan included
-
Output over voltage, short circuit, and over current protection
-
100% Hi-pot, ATE, and burn-in tested
-
Re-settable power shut down
-
Complies with FCC part 15 subpart J Class B and CISPR 22
Class B
-
Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report), CE
There are no accessories for this product at this time.
