Specification
•
Temperature Range: Operating 0° C ~ +25° C on 250W
output load or 0° C ~ +50° C on 220W output load ; storage
& shipping -20° C ~ +80° C
•
Humidity: 5 ~ 90% on operating, 5 ~ 95% on storage
•
Dielectric Withstand: Primary frame ground 1800V AC for
1 second
•
Efficiency: 80% minimum, typical up to 87%
•
Rise time: Less than 20ms
•
Hold-up Time: 17ms minimum at nominal input voltage
•
Power Good Signal: Power on delay time 100 ~ 500ms, off
delay 1ms minimum (TTL and CMOS compatible)
•
Leakage Current: Less than 3.5mA at 264Vac, 50Hz
•
MTBF: 100,000 hours on maximum load at +25°C
•
Dimensions (LxWxH):150x81.5x40.5mm /6x3.2x1.6inch
Features
•
Complied with Flex ATX and ATX12V standard
•
Active Power Factor Correction (PFC) meet EN61000-3-2
•
High efficiency and reliability
•
Compatible with European Union Directive 2002/95/EC
(Restriction on Hazardous Substances).
•
Remote ON/OFF function
•
Internal 12V DC fan included
•
Noise Killer (thermal fan speed control function)
•
Low noise and ripple
•
Output over voltage, short circuit, and over current protection
•
100% Hi-pot, ATE, and burn-in tested
•
Re-settable power shut down
•
Complies with FCC part 15 subpart J class B 115Vac operation,
and CISPR 22 class B at 230Vac operation
Approved
• by UL60950, CSA C22.2 NO. 60
VDE EN60950, NEMKO EN60950 (CB Report) CE
950, TUV EN60950 or
There are no accessories for this product at this time.
