Specification

• Temperature Range: Operating: 0°C ~ +50°C on full load;

storage & shipping: -20°C ~ +80°C

• Humidity: 5~90% on operating,5~ 95% on storage

• Dielectric Withstand: Primary frame ground 1800V AC for

1 second

• Efficiency: 80% minimum, typical up to 87%

• Rise time: Less than 20ms

• Hold-up Time: 17ms minimum at nominal input voltage

• Power Good Signal: Power on delay time 100 ~ 500ms, off

delay 1ms minimum (TTL and CMOS compatible)

• Leakage Current: Less than 3.5mA at 264Vac, 50Hz

• MTBF: 100,000 hours on maximum load at +25°C

• Dimensions (LxWxH): 150x81.5x40.5mm /6x3.2x1.6inch

Features
• Complied with Flex ATX and ATX12V standard
• Active Power Factor Correction (PFC) meet EN61000-3-2
• High efficiency and reliability
• Compatible with European Union Directive 2002/95/EC
(Restriction on Hazardous Substances).
• Remote ON/OFF function
• Internal 12V DC fan included
• Noise Killer (thermal fan speed control function)
• Low noise and ripple
• Output over voltage, short circuit, and over current protection
• 100% Hi-pot, ATE, and burn-in tested
• Re-settable power shut down
• Complies with FCC part 15 subpart J class B 115Vac operation,
and CISPR 22 class B at 230Vac operation
• Approved by UL60950-1, CSA C22.2 NO. 60950-1, TUV
EN60950 , NEMKO EN60950-1 (CB Report) CE

Weight (lbs): 6.00

There are no accessories for this product at this time.