Features

• Complied with EPS12V standard

• Active Power Factor Correction (PFC) meet EN61000-3-2

• High efficiency and reliability

• Remote ON/OFF function

• Internal 12V DC fan included

• Noise Killer (thermal fan speed control function)

• Low noise and ripple

• Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation

• Output over voltage, short circuit, and over current protection

• 100% Hi-pot, ATE, and burn-in tested

• Re-settable power shut down

• Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950 or VDE EN60950, NEMKO EN60950 (CB Report), CE

Input Characteristics

Input Range: 90 ~ 265Vac (RMS), Full Range Input

Frequency: 47 ~ 63Hz

Input Current: 6A (RMS) @115Vac, 3A (RMS) @230Vac

Inrush Current: 80A Max @115Vac, 120A Max @230Vac cold start

Specification

• Temperature Range: Operating: 0°C ~ +50°C on full load; storage & shipping: -20°C ~ +80°C

• Humidity: 5 ~ 95% on operating and storage

• Dielectric Withstand: Input to frame ground 1800 VAC for 1 second

• Efficiency: 70% at minimum measured at nominal AC main voltage and frequency with maximum load on all outputs

• Rise time: Less than 20ms

• Hold-up Time: 18ms minimum at nominal input voltage

• Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)

• Leakage Current: Not exceed 3.5mA at 264Vac, 50Hz

• MTBF: 100,000 hours on maximum load at +25°C

• Dimensions (LxWxH): 220x100x40.5mm/8.7x3.9x1.6inch

Weight (lbs): 6.00

There are no accessories for this product at this time.