Specification

Temperature Range: Operating  0° C ~ +50° C; storage & shipping -20° C ~ +80° C

Rise Time: Less than 50ms on +5V DC

Hold-up Time: 18ms minimum

Dielectric Withstand: Primary to frame ground 1800 VAC for 1 second

Humidity: 95% RH on operating and 95% on storage

Efficiency: 70% at minimum measured at nominal AC main voltage and frequency with maximum load on all output

Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1 ms minimum

Leakage Current: Less than 3.5mA

MTBF: 100,000 hours on maximum load at +25° C degree

Dimensions (WxHxL): 100x40.5x250mm/4x1.6x10  inches

 

 

 

Features

• Complied with EPS12V standard

• Active Power Factor correction meeting with EN61000-3-2

• High efficiency and reliability

• Remote On/Off function

• Internal 12V DC fan included

• Noise Killer (Thermal fan speed control function)

• Low noise and ripple

• Complies with FCC part 15 subpart J class B and CISPR 22 Class B

• Output over voltage, short circuit, and over current protection

• 100% Hi-pot, ATE, and burn-in tested

• Re-settable power shut down

• Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, Nemko (CB Report) ,CE

Weight (lbs): 8.00

There are no accessories for this product at this time.