Specification
Temperature Range:
Operating: 0°C ~ +50°C on full load;
storage & shipping: -20°C ~ +80°C
Humidity:
5 ~ 95% on operating and storage
Dielectric Withstand:
Input to frame ground 1800 VAC for
2 second
Efficiency :
68% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
Rise Time :
Less than 20ms
Hold-Up Time :
17ms minimum at nominal input voltage
Power Good Signal :
Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current:
Not exceed 3.5mA at 264Vac, 50Hz
MTBF:
100,000 hours on maximum load at +25°C
Dimensions (LxWxH):
150x81.5x40.5mm/6x3.2x1.6in
Features
-
Complied with Flex ATX and ATX12V standard
-
Active Power Factor Correction (PFC) meet EN61000-3-2
-
Remote ON/OFF function
-
High efficiency and reliability
-
Noise Killer (thermal fan speed control function)
-
Low noise and ripple
-
Internal 12V DC fan included
-
Output over voltage, short circuit, and over current protection
-
100% Hi-pot, ATE, and burn-in tested
-
Re-settable power shut down
-
Complies with FCC part 15 subpart J class B 115Vac operation,
and CISPR 22 class B at 230Vac operation
-
Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950
or VDE EN60950, NEMKO EN60950 (CB Report), CE
There are no accessories for this product at this time.
