Specification
Temperature Range:
Operating 0° C ~ +25° C on full load; storage & shipping -20° C ~ +65° C
Humidity:
90% on operating and 95% on storage
Dielectric Withstand:
Input to frame ground 1800V AC for 1 second
Efficiency :
65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
Rise Time :
Less than 20ms
Hold-Up Time :
16.6ms minimum at115V/60hz; 10ms minimum at 230/50Hz input voltage
Power Good Signal :
Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
(TTL and CMOS compatible)
Leakage:
Not exceed 3.5mA at 115V AC, 60Hz
MTBF:
100,000 hours on maximum load at +25° C degree
Dimensions (LxWxH):
125x63.5x130mm/5”x2.5”x5.1” inches
Features
-
Complied with SFX and SFX12V standard
-
High efficiency and reliability
-
Remote On/Off function
-
Internal 12V DC fan included
-
Low noise and ripple
-
Noise Killer (Thermal fan speed control function)
-
Output over voltage, short circuit, and over current protection
-
100% Hi-pot, ATE, and burn-in tested
-
Re-settable power shut down
-
Complies with FCC part 15 subpart J Class B and CISPR 22
Class B
-
Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO
There are no accessories for this product at this time.
