Specification
Temperature Range:
Operating: 0°C ~ +50°C, Full load
at 25°C, De-rate 2W/°C from 25°C to 50°C; Storage & shipping: -20°C ~ +65°C
Humidity:
5 ~ 95% on operating and storage
Dielectric Withstand:
Primary frame ground 1800V AC for 1 second
Efficiency :
70% minimum measured at normal AC mains voltage and frequency with full load
Rise Time :
Less than 20ms
Hold-Up Time :
17ms minimum at nominal input voltage
Power Good Signal :
Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current:
Less than 3.5mA
MTBF:
100,000 hours on maximum load at +25° C
Dimensions (LxWxH):
140x150x86mm/5.5x5.9x3.4inch
Features
-
Complied with ATX12V standard
-
High efficiency and reliability
-
Remote On/Off function
-
Internal 12V DC fan included
-
Low noise and ripple
-
Noise Killer (Thermal fan speed control function)
-
Output over voltage, short circuit, and over current protection
-
100% Hi-pot, ATE, and burn-in tested
-
Re-settable power shut down
-
Compatible with European Union Directive 2002/95/EC
(Restriction on Hazardous Substances).
-
Complies with FCC part 15 subpart J class B 115Vac operation,
and CISPR 22 class B at 230Vac operation
-
Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950
or VDE EN60950, NEMKO EN60950
There are no accessories for this product at this time.
