Specification
Temperature Range:
Operating 0° C ~ +25° C on full
load; storage & shipping -20° C ~ +80° C
Humidity:
5~95% on operating and storage
Dielectric Withstand:
Primary to frame ground 1800V
AC for 1 second
Efficiency :
min 80% at 230VAC & 75% at 115VAC
main voltage and frequency with maximum load on all
output
Rise Time :
Less than 20ms
Hold-Up Time :
17ms minimum at nominal input voltage
Power Good Signal :
Power on delay time 100 ms to 500
ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage:
Less than 3.5mA at 115V AC/60Hz
MTBF:
100,000 hours on maximum load at +25° C degree
Dimensions (LxWxH):
150x86x140mm/5.9”x3.2”x5.5” inches
Features
-
Complied with ATX and ATX12V standard
-
High efficiency and reliability
-
Remote ON/OFF function
-
Noise Killer (thermal fan speed control function)
-
Low noise and ripple
-
Internal 12V DC fan included
-
Output over voltage, short circuit, and over current protection
-
100% Hi-pot, ATE, and burn-in tested
-
Re-settable power shut down
-
Active Power Factor Correction Meeting with EN61000-3-2
-
Complies with FCC part 15 subpart J Class B and CISPR 22
Class B
-
Approved by UL60950, CSA C22.2, TUV or VDE, NEMKO
(CB Report), IEC 60950 and CE
There are no accessories for this product at this time.
