Specification
Temperature Range:
Operating: 0°C ~ +50°C; storage & shipping: -20°C ~ +80°C
Humidity:
85% on operating, 95% on storage
Dielectric Withstand:
Primary frame ground 1800V AC for 1 second
Efficiency :
80% minimum, typical up to 87%
Rise Time :
Less than 20ms
Hold-Up Time :
17ms minimum at nominal input voltage
Power Good Signal :
Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage:
Less than 3.5mA at 264Vac,50Hz
MTBF:
100,000 hours on maximum load at +25°C
Dimensions (LxWxH):
140x150x86mm /5.5x5.9x3.4inch
Features
-
Complied with ATX12V standard
-
Active Power Factor Correction (PFC) meet EN61000-3-2
-
High efficiency and reliability
-
Compatible with European Union Directive 2002/95/EC
(Restriction on Hazardous Substances).
-
Remote ON/OFF function
-
Noise Killer (thermal fan speed control function)
-
Low noise and ripple
-
Internal 12V DC fan included
-
Output over voltage, short circuit, and over current protection
-
100% Hi-pot, ATE, and burn-in tested
-
Re-settable power shut down
-
Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
-
Approved by CUL/UL 60950-1, CSA, TUV EN60950-1, CB report (60950-1) BSMI, FCC, EMC
There are no accessories for this product at this time.
