Specification
•
Temperature Range: Operating: 0°C ~ +50°C on full load;
storage & shipping: -20°C ~ +80°C
•
Humidity: 5-90% on operating,5-95% on storage
•
Dielectric Withstand: Primary frame ground 1800V AC for
1 second
•
Efficiency: 80% minimum, typical up to 87%
•
Rise time: Less than 20ms
•
Hold-up Time: 17ms minimum at nominal input voltage
•
Power Good Signal: Power on delay time 100 ~ 500ms, off
delay 1ms minimum (TTL and CMOS compatible)
•
Leakage Current: Less than 3.5mA at 264Vac, 50Hz
•
MTBF: 100,000 hours on maximum load at +25°C
•
Dimensions (LxWxH): 140x150x86mm / 5.5x5.9x3.4inch
Features
•
Complied with ATX12V standard
•
Active Power Factor Correction (PFC) meet EN61000-3-2
•
High efficiency and reliability
•
Compatible with European Union Directive 2002/95/EC
(Restriction on Hazardous Substances).
•
Remote ON/OFF function
•
Internal 12V DC fan included
•
Noise Killer (thermal fan speed control function)
•
Low noise and ripple
•
Output over voltage, short circuit, and over current protection
•
100% Hi-pot, ATE, and burn-in tested
•
Re-settable power shut down
•
Complies with FCC part 15 subpart J class B 115Vac operation,
and CISPR 22 class B at 230Vac operation
•
Approved by UL60950-1, CSA C22.2 NO. 60950-1, TUV
EN60950 or VDE EN60950-1, NEMKO EN60950-1 (CB Report)
There are no accessories for this product at this time.
