Specification

Temperature Range: Operating 0° C ~ 50° C; storage & shipping -20° C ~ 65° C

Temperature Coefficient: 0.01% / ° C

Transient Response: Output voltage returns in less than 1 ms max. at a 25% load change

Hold-up Time: 18ms minimum at 115V/60Hz. 20.0ms at 230V/50Hz

Dielectric Withstand: Input to frame ground 1800 VAC for 1 second

Humidity: 95% RH

Efficiency: 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output

Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1 ms minimum

Maximum power: 460W

Dimensions (WxHxL): 150x86x140(mm)/5.9x3.4x5.5

Features

• High efficiency

• Active PFC circuit

• Power factor correction (PFC)>0.95@100VAC

• Internal 12 VDC fan included

• Low noise and ripple

• Complies with FCC part 15 subpart J class B 115VAC operation and CISPR 22 class B 230 VAC operation

• Output over voltage protection

• Short circuit protection on all outputs

• MTBF above 100,000 hrs. at 25° C

• 100% Hi-pot & ATE tested

• Short circuit protection on all outputs

• Resettable power shut down

• 100% burn-in under high ambient temp. (50° C)

• Approved by UL 1950, CSA C22.2 Level 3, IEC 950, VDE 0805, NEMKO (CB Report)

Connectors: EPS-12V
Weight (lbs): 8.00

There are no accessories for this product at this time.