Pentium® D SuperWorkstations

Supermicros' mid-tower workstation platforms provide great performance and functionality at a barely audible noise level - perfect for workspace or home. Powered by the latest Pentium® D processors, they are ideal for graphics-intensive applications, extreme gaming, or video rendering.

Key Feature

• Intel® Pentium® D, Pentium® 4 Extreme Edition, Pentium 4, Pentium Extreme Edition, & Celeron D in LGA775 Package(FSB 1066/800/533)
• Up to 8GB dual channel unbuffered, ECC DDR2 667/533/400 SDRAM
• 1 (x16) & 1 (x1) PCI-Express 2x 64-bit 133MHz PCI-X 3x 32-bit 33MHz PCI
• 1x Intel® 82573V (Tekoa) PCI-e Gigabit LAN Port and 8x USB 2.0 ports
• 4 x Hot-swappable SATA Hard Drive Bays
• 450W Power Supply

Motherboard Super PDSGE Processor/Cache CPU Single LGA775 ZIF Socket Supports an Intel® Pentium® D (Dual Core) processor Supports an Intel® Pentium® Extreme Edition processor Supports an Intel® Pentium® 4 processor Supports an Intel® Pentium® 4 Extreme Edition processor Supports an Intel® Celeron® D processor Hyper-Threading (HT) capable System Bus 1066 / 800 / 533 MHz system bus System Memory Memory Capacity Four 240-pin DIMM sockets Supports up to 8 GB of unbuffered, ECC DDR2 667/533/400MHz memory (Single / Dual Channel) Memory Type DDR2 667/533/400MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs DIMM Sizes 256 MB, 512 MB, 1 GB, 2GB Memory Voltage 1.8 V only On-Board Devices Chipset Intel 955X (Glenwood) ICH7R + PXH-V + Intel® 82573V Serial ATA Intel® ICH7R SATA (3 Gbps) controller built-in Host RAID 0, 1, 5, and 10 Support Network Controllers Single-port Intel® 82573V Gigabit PCI-Express Ethernet (Tekoa) Supports 10BASE-T, 100/1000BASE-TX, RJ45 output Audio AC'97 audio CODEC with high quality 6-channel sound Super I/O Winbond 83627EHF chip Expansion Slots PCI-Express 1 (x16) slot 1 (x1) slot PCI-X 2x 64-bit 133MHz PCI-X (3.3V) slot PCI 3x 32-bit 33MHz PCI (5V) slot Input / Output Serial ATA Four Serial ATA ports ( 3Gbps performance) Four SATA hard drives supported IDE One EIDE channel supports up to two UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 Floppy 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support LAN 1x RJ45 LAN port USB 8x USB 2.0 compliant / 1.1 compatible (6x ports + 2x headers) 2 in front (FUCI), 6 in rear Audio 1x Line In / Line Out / Microphone ports Front Panel Header Keyboard / Mouse PS/2 keyboard and mouse ports Serial Ports 1x Fast UART 16550 serial port 1x Serial Header Parallel Port 1x ECP/EEP Parallel Port System BIOS BIOS Type 8Mb Flash EEPROM with AwardBIOS® BIOS Features User Over-Clock in System BIOS Plug and Play (PnP) APM 1.2 DMI 2.3 support PCI 2.2 ACPI 1.0 BIOS rescue hot keys USB Keyboard support

Chassis Form Factor Mid-Tower Model SC733T-450 Physical Features Height 16.8" (427mm) Width 7" (178mm) Depth 20.9" (531mm) Weight 39 lbs (17.7kg) Available Colors Beige, Black Front Panel Buttons Power On/Off button System Reset button LEDs Power LED Hard drive activity LED Network activity LED System Overheat LED Ports 2x Front side USB ports (USB 2.0 ready) Drive Bays Hot-swap 4x 1" Serial ATA hot-swap drive bays Peripheral Bay 2x 5.25" peripheral drive bay 1x 3.5" bay for floppy drive Peripheral Drives Floppy TEAC 3.5" 1.44MB Floppy Drive System Cooling Fans 1x 12cm rear exhaust fan 1x 9cm mounted thermal cooling fan 2x 8cm fans (450W power supply configuration) SATA Backplane 4 x 1" SATA Backplane Power Supply 450W low-noise AC power supply with redundant cooling feature (with PFC) AC Voltage 100 - 240V, 50/60Hz, 10 Amp DC Output 5V + 3.3V ≤ 160W 12V1 + 12V2 + 12V3 ≤ 34 Amp +5V 26 Amp +5V standby 2 Amp +12V1 15 Amp +12V2 15 Amp +12V3 18 Amp -12V 1 Amp +3.3V 30 Amp PC Health Monitoring CPU Monitors for CPU Cores, +1.5V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V Adjustable CPU clock frequency ratio settings (via BIOS) FAN Total of five 4-pin fan headers 5x fans with tachometer monitoring Status monitor with firmware / software speed control Support 4-pin PWM fan (with speed control) Temperature Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor (TM2) Support LED CPU / System Overheat LED +5V standby alert LED Suspend-state indicator LED Other Features Chassis intrusion detection Chassis intrusion header Lead Free (not 100%)

Weight (lbs): 46.00

There are no accessories for this product at this time.