Pedestal SuperServer
Mission-critical applications demand ever-increasing performance and availability from enterprise servers. With the latest performance, reliability, manageability and serviceability features in an expandable pedestal design, these servers provide an ideal solution for demanding enterprise applications.
Key Feature
- Dual Intel® Pentium® Support up to 1.4 GHz
- Up to 4GB PC133/100 SDRAM
- 6x 64-bit PCI-X expansion slots
- 1x Intel® 82550 10/100 Ethernet Port
- Zero Channel RAID Support
- 10 x 1" hot-swap Ultra160 SCSI Drive Bays
- Triple-Redundant 350W power supply
 |
 |
| CPU |
 |
• Dual FCPGA370 ZIF Sockets • Supports an Intel® Pentium® III processor with 512KB of integrated Advanced Transfer Cache up to 1.4GHz |
 |
| System Bus |
 |
133MHz/100MHz system bus |
 |
 |
 |
| Memory Capacity |
 |
• Four 168-pin DIMM sockets • Supports up to 4 GB of PC133/100 memory |
 |
| Memory Type |
 |
• PC133/100 72-bit registered ECC SDRAM, 168-pin gold-plated DIMMs |
 |
| DIMM Sizes |
 |
64 MB, 128 MB, 256 MB, 512 MB, 1 GB |
 |
| Memory Voltage |
 |
2.5 V only |
 |
 |
 |
| Chipset |
 |
• Serverworks™ Serverset III LE chipset • CNB30LE + OSB4/OSB5 |
 |
| SCSI |
 |
• Adaptec AIC-7892 Controller • Single-Channel Ultra160 SCSI |
 |
| Network Controllers |
 |
• 2x Intel® 82559 10/100 Ethernet • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
 |
| Graphics |
 |
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
 |
 |
 |
| PCI Expansion |
 |
• 2x 64-bit 66/33MHz PCI (3.3V) slots • 2x 32-bit 33MHz PCI (5V) slots |
 |
| IDE |
 |
• Dual EIDE channels support up to four UDMA IDE devices • Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
 |
| USB |
 |
Up to 2 USB ports |
 |
| Serial Ports |
 |
2 Fast UART 16550 serial ports |
 |
| Parallel Port |
 |
Port header provided; parallel cable required for parallel port |
 |
| Floppy |
 |
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
 |
| Keyboard / Mouse |
 |
PS/2 keyboard and mouse ports |
 |
 |
 |
| BIOS Type |
 |
4Mb Flash EEPROM with AMI® BIOS |
 |
| BIOS Features |
 |
• Plug and Play (PnP) • APM 1.2 • DMI 2.1 • PCI 2.2 • ACPI 1.0 • BIOS rescue hot keys • Hardware BIOS virus protection • USB Keyboard support |
 | |
 |
 |
 |
| Form Factor |
 |
Pedestal Server Tower |
 |
| Model |
 |
SC830-W |
 |
 |
 |
| Height |
 |
19.9" (505mm) |
 |
| Width |
 |
15.0" (381mm) |
 |
| Depth |
 |
22.8" (579mm) |
 |
| Gross Weight |
 |
104 lbs (47.3kg) |
 |
| Available Colors |
 |
Beige, Black |
 |
 |
 |
| Buttons |
 |
• Power On/Off button • System Reset button |
 |
| LEDs |
 |
• Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED • Power Fail LED |
 |
 |
 |
| Hot-swap |
 |
• 4x 1" SCA Ultra320/160 Hot-swap Drives |
 |
| Peripheral Bay(s) |
 |
• 9x 5.25" Peripheral Drive Bays • 2x 3.5" Peripheral Drive Bays |
 |
 |
 |
| SCAU160 SCA SCSI Backplane for Pedestal Chassis |
 |
 |
 |
| Fans |
 |
• 4x 90mm Hot-swappable Fans • 2x 90mm Rear Exhaust Fan |
 |
 |
 |
| 300W + 300W Redundant Hot-swap AC power supply w/ PFC |
 |
| +5V |
 |
30.0 Amp |
 |
| +5V standby |
 |
1.5 Amp |
 |
| +12V |
 |
12.0 Amp |
 |
| +3.3V |
 |
15.0 amp |
 |
 |
 |
| CPU |
 |
• Monitors for CPU Cores, +5, ±12V • CPU Core auto-switching voltage regulator w/ auto-sense from 1.4V-3.5V • Adjustable CPU clock frequency ratio settings (via BIOS) |
 |
| FAN |
 |
• Total of seven 3-pin fan headers • 2x fans with tachometer monitoring • Status monitor with firmware/software on/off control |
 |
| Temperature |
 |
• Monitoring for CPU, chassis, environment |
 |
| LED |
 |
• CPU Overheat LED • System Overheat LED • Suspend-state indicator LED |
 |
| Other Features |
 |
• Chassis intrusion detection (through LDCM) • Chassis intrusion header | |
There are no accessories for this product at this time.