Tower/4U Quad-Core, Dual-Core Xeon® 5000 Sequence SuperServer

Powered by the latest quad-core Xeon® 5300 and dual-core Xeon® 5000/5100 sequence processors with up to 64GB of FB-DIMM memory support, the SuperServer 7045 series offer versatility in either a tower or rack mount 4U form factor and support enterprise-class SAS/SCSI/SATA drives. Designed with 100% cooling redundancy via a combination of high-performance fans and a custom-designed air-shroud, the probability of downtime or performance reduction is greatly reduced.

Key Feature

• Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core, with 667 / 1066 / 1333 MHz FSB
• Up to 64GB 667/533MHz DDR2 ECC FB-DIMM (Fully Buffered DIMM)
• 2 (x8) & 1 (x4) PCI-Express, 2x 64-bit 133MHz PCI-X, 1x 64-bit 100MHz PCI-X
• Intel® (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet Controller
• 8 x 1" Hot-swap Drive Bays
• 800W High Efficiency Redundant Power Supply
• Tower or Rackmount

Product SKUs SYS-7045B-TR+ SuperServer 7045B-TR+, Black (optional Beige) Motherboard Super X7DBE+ Processor/Cache CPU Dual 771-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5300 sequence (Clovertown processor) up to 2.66 GHz Dual-Core Intel® Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up to 3.73 GHz NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon® 5100 (Woodcrest) processors System Bus 1333, 1066 & 667 MHz system bus Operating System Software Supports 64-bit Operating Systems Supports 32-bit Operating Systems System Memory Memory Capacity Sixteen 240-pin DIMM sockets Supports up to 64 GB 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Type 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 512 MB, 1GB, 2GB, 4GB Memory Voltage 1.8 V only 1.5V(AMB) Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) On-Board Devices Chipset Intel® 5000P (Blackford) chipset MCH + PXH + ESB2 SATA Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support IPMI Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (SIMLP) (Optional: AOC-SIMLP-B) Network Controllers Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking Graphics ATI ES1000 controller with 16 MB of video memory Super I/O Winbond 83627HG chip Expansion Slots PCI-Express 2 (x8) PCI-e slots 1 (x4) PCI-e (using x8) slot PCI-X 2x 64-bit 133MHz PCI-X (3.3V) slots 1x 64-bit 100MHz PCI-X (3.3V) slot Input / Output Serial ATA Six Serial ATA ports Six SATA hard drives supported IDE Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Compact Flash (40-pin connector, IDE 1, single channel) slot Supports UDMA Mode 5, PIO Mode 4, and ATA/100 Floppy 1 Floppy controller; 1.44 MB, 2.88 MB LAN 2x RJ45 LAN port USB 2x USB rear ports 3x USB internal headers Total 5 USB 2.0 Compliant / 1.1 Compliant VGA 1x VGA Port Keyboard / Mouse PS/2 keyboard and mouse ports Serial Port / Header 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header Parallel Port 1 ECP / EEP parallel port

Chassis Form Factor 4U Rackmountable / Tower Optional Rackmount Kit (CSE-PT26) Model SC745TQ-R800 Dimensions Height 7.0" (177mm) Width 17.1" (434mm) Depth 25.5" (647mm) Gross Weight 63 lbs (28.6kg) Available Colors Beige, Black Front Panel Buttons Power On/Off button System Reset button LEDs Power LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Fail LED Power Fail LED Ports 2x USB Ports Drive Bays Hot-swap 8x Hot-swap Drive Bays Supports up to 6x SATA Hard Drives Peripheral Bay(s) 2x 5.25" Peripheral Drive Bay 1x 5.25" Bay For Floppy Drive Peripheral Drives Floppy Panasonic 3.5" 1.44MB Floppy Drive SATA Backplane SATA Backplane w/ Enclosure Management System Cooling Fans 3x 5000 RPM Hot-Swappable Cooling Fans 2x 5000 RPM Hot-Swappable Rear Exhaust Fan Shroud 1x Air Shroud Power Supply 800W AC power supply w/ PFC AC Voltage 100 - 240V, 50-60Hz, 10-4 Amp +5V standby 4 Amp +12V 66 Amp +5V 30 Amp +3.3V 24 Amp -12V 0.6 Amp PC Health Monitoring CPU Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V FAN Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans 8x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support LED CPU / System Overheat LED Other Features Chassis intrusion detection Chassis intrusion header SDDC Support Operating Environment / Compliance Environmental Spec. Operating Temperature: 10º to 35º C (50º to 95º F) Non-operating Temperature: -40º to 70º C (-40º to 158º F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) System BIOS BIOS Type 8Mb Flash EEPROM with Phoenix® BIOS BIOS Features Plug and Play (PnP) SMBIOS 2.3 DMI 2.1 PCI 2.2 ACPI 1.0 USB Keyboard support Hardware BIOS Virus protection

Weight (lbs): 72.00

There are no accessories for this product at this time.