- Application for industry use
- PFC: Active
- AC input full range
- Complies with EN6100-3-2
- Low ripple & noise
- High efficiency
Input voltage: 90 to 264 VAC
Input frequency: 47 to 63 Hz
Over voltage protection: +3.3V: 3.5V - 4.8V; +5V: 5.5V - 6.82V; +12V: 13.4V - 15.6V
Short circuit protection: It is defined to be a short circuit load of less than 0.1 ohm
Hold-up time: >17ms
Efficiency: >80% at full load.
Voltage: 1500VAC from input to output
MTBF: 100,000 hours at full load at 25˚C
Operating temperature: 0˚C to +50˚C
Storage temperature: -20˚C to +80˚C
Relative humidity: 95% non-condensing
(1) The +3.3V and +5V total output shall not exceed 150watts.
(2) total output for this subject power supply is 400 watts.
(3) Ripply and noise measurements shall be made under all specified load conditions through a single pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading.
(4) -5V is option.