Specification

• AC Input Voltage Range: 100VAC ～ 240VAC, +/-10%, 47 to 63 Hz.
• INPUT CURRENT:10.0 A ( RMS ) FOR 115VAC /5.0 A ( RMS ) FOR 230VAC.
• Input Power Factor: The minimum power factor at full load shall be 0.98/115V 60 Hz and 0.95/230V 50 Hz
• Inrush current: 35A MAX. FOR 115 VAC / 55A MAX. FOR 230 VAC.
• DC Output: 520W maximum

Features:

• DIMENSION: D225 X W100 X H70mm
• COOLING: By forced air.
• TEMPERATURE RANGE: Operation 0℃~45℃
• HOLD UP TIME: 16ms at maximum load & normal input voltage
• EFFICIENCY: TYPICAL >80% AT 115VAC, FULL LOAD.
• ATX 12V / EPS 12V
• POWER GOOD SIGNAL: PW-OK is power good signal and should be asserted high by the power supply to indicate that +5VDC and +3.3VDC output are above the under voltage thresholds of the power supply TTL. compatible signal out with 100ms to 500ms.
• OVER POWER PROTECTION: The power supply shall shut down when output power exceeds 110﹪to 160﹪ of full load and require a power on cycle be performed by the operate
• OVER VOLTAGE PROTECTION: Standard on +5.0V, set at 6.5VDC ± 0.75VDC
• SHORT CIRCUIT PROTECTION: A short circuit placed between the DC return and the output shall cause no damage and the power supply shall shutdown
• EMI: FCC CLASS B, CISPR22 CLASS B.
• AGENCY APPROVALS: TO MEET UL, CUL, TUV
• MTBF OF POWER SUPPLY ELECTRONNIS: 100,000 hours at 25℃ 75% loading.

Output Voltage:

OUTPUT VOLTAGE	OUTPUT CURRENT		REGULATION		OUTPUT
	MIN ( A )	MAX ( A )	LOAD	LINE	RIPPLE & NOISE MAX. [ P-P ]
+5V	0.5	25	±5%	±1%	60mV
+12V	2	56	±5%	±1%	120mV
-12V	0	0.8	±5%	±1%	120mV
+3.3V	0.5	25	±5%	±1%	60mV
+5VSB	0.1	3.5	±5%	±1%	60mV

Output Wattage: 540W
Input Voltage: 100VAC ～ 240VAC
Dimension (D x W x H): 200 x 100 x 40.5mm
Weight (lbs): 6.00

DRAWING

There are no accessories for this product at this time.