Product Overview

The EliteRAID ER104UT+ is a 4-bay hardware RAID 5 rackmount storage unit that utilizes high performance USB 3.0 and eSATA interfaces to provide over 200MB/s in performance. The included USB 3.0 is backwards compatible with the widely available USB 2.0 port, which is a convenient feature when both USB 3.0 and eSATA connections are unavailable. With built-in RAID 0, 1, 10, 3, 5+hot-spare and JBOD, the ER104UT+ provides hardware RAID redundancy protection against hard drive failures. A brand new RAID mode, CLONE or N-Way Mirror, is also introduced to replicate the saved data throughout each of the installed hard drives. The RAID engine is embedded within the enclosure and performs all RAID parity calculations to reduce CPU utilization from the host computer, RAID controller cards are no longer necessary.

The use of enterprise hard drives is recommended when in use with any RAID controller applications. Standard desktop or green desktop drive may not be supported and may compromise RAID system stability and performance

Features

• World first 1U 4 bay USB 3.0 and eSATA Hardware RAID 5 storage.
• Hardware RAID, supporting RAID 0, 1, 10, 3, 5, JBOD, Clone and hot spare disk.
• Over 200MB/s read and 170MB/s write performance.
• eSATA and USB 3.0 interface.
• Backward compatible with USB 2.0.
• True hardware RAID design within the enclosure, no driver and additional RAID controller needed.
• New Clone mode (N-way Mirror) - all the hard drives connected will be mirrored. Clone mode is especially useful when users would like to copy data form one hard drive to several hard drives at the same time.
• Supports SATA I (1.5Gb/s) and SATA II (3Gb/s) hard drives.
• Over 3TB per volume via eSATA and USB on OS that support 3TB and above.
• Automatic insertion / removal detection and rebuild.
• Hardware RAID with standard Interface. No extra drivers required.
• Build-in rackmount bracket.
• Redundant power supply option available.
• Default color in silver (alternative color in black)

Specifications

• RAID Level: 0, 1, 10, 3, 5, Clone (N-way Mirror) with Hot Spare and JBOD
• Maximum Capacity: 12TB 
• Auto Rebuilding: Yes
• Hot-Spare: Yes
• Host Interface & Transfer Rate  USB 3.0 (backward compatible with USB 2.0) and eSATA
• Cooling Fan: 4 x Internal 
• Safety Regulations: CE, FCC, UL, RoHS
• Package Contents: ER104UT+ (1), Power Cord (1), eSATA Cable (1), USB 3.0 Cable (1), Screws (1 set), Quick Installation Manual & CD (1)

 

Dimension: 1.68”H x 19”W x 21”D
External Bay: 4 Hot-Swappable 3.5"
Form Factor: Rackmount
Power Supply: 220W 80PLUS; Auto switch for 100V~ 240V; 50 ~ 60Hz Redundant power supply option available
Front Panel LED: Power LED, Overheat/FAN Fail LED HDD Power and Activity LED
Controls: RAID Switch
Hard Drive: 4 x 3.5” SATA I/ SATA II
Weight (lbs): 26.00

Click to enlarge

There are no accessories for this product at this time.