Specification

• Temperature Range:Operating 0° C ~ +25° C on 250W output load or 0° C ~ +50° C on 220W output load ; storage & shipping -20° C ~ +80° C
• Humidity: 5 ~ 90% on operating, 5 ~ 95% on storage
• Dielectric Withstand: Primary frame ground 1800V AC for 1sec
• Efficiency: 80%minimum, typical up to 87%
• Rise Time: Less than 20ms
• Hold-Up Time : 17ms minimum at nominal input voltage
• Power Good Signal : Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
• Leakage Current: Less than 3.5mA at 264Vac, 50Hz
• MTBF: 100,000 hours on maximum load at +25°C
• Dimensions (LxWxH):150x81.5x40.5mm /6x3.2x1.6inches

Features:

• Complied with EPS12V and ATX12V standard
• Active Power Factor Correction Meeting with EN61000-3-2
• High efficiency and reliability
• Compatible with European Union Directive 2002/95/EC(Restriction on Hazardous Substances).
• Remote ON/OFF function
• Noise Killer (thermal fan speed control function)
• Low noise and ripple
• Internal 12V DC fan included
• Output over voltage, short circuit, and over current protection
• 100% Hi-pot, ATE, and burn-in tested
• Re-settable power shut down
• Complies with FCC part 15 subpart J class B 115Vac operation,and CISPR 22 class B at 230Vac operation
• Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950 or VDE EN60950, NEMKO EN60950 (CB Report) CE

Weight (lbs): 6.00

There are no accessories for this product at this time.