Specification
Temperature Range: Operating 0° C ~ 50° C; storage & shipping -20° C ~ 80° C
Temperature Coefficient: 0.01% / ° C
Transient Response: Output voltage returns in less than 1 ms max. at a 25% load change
Hold-up Time: 17ms minimum at full load & nominal input voltage
Dielectric Withstand: Input to frame ground 1800 VAC for 1 second
Humidity: 95% RH
Efficiency: 68% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1 ms minimum
Overload Protection: 150% Max.
Maximum power: 350W ( +5V and +3.3V total output not exceed 157W, 3.3V &+5V &+12V total output not exceed 330W )
Dimensions (WxHxL): 100x40.5x220(mm)/3.9”x1.57”x8.66”
Features
-
High efficiency
-
Active PFC circuit
-
Power factor correction (PFC)>0.95@100VAC
-
Internal 12 VDC fan included
-
Low noise and ripple
-
Complies with FCC part 15 subpart J class B 115VAC operation and CISPR 22 class B 230 VAC operation
-
Output over voltage protection
-
Short circuit protection on all outputs
-
MTBF above 50,000 hrs. at 25° C
-
100% Hi-pot & ATE tested
-
Short circuit protection on all outputs
-
Resettable power shut down
-
100% burn-in under high ambient temp. (50° C)
-
Approved by UL 1950, CSA C22.2 Level 3, IEC 950, VDE 60950, TUV EN60950, NEMKO (CB Report)
