Specification
Temperature Range: Operating 0° C ~ +25° C; storage & shipping -20° C ~ +80° C
Rise Time: Less than 20ms on all outputs
Hold-up Time: 17ms minimum at 115V/60Hz;20ms minimum at 230V/50Hz input voltage
Dielectric Withstand: Primary to frame ground 1800 VAC for 1 second
Humidity: 95% RH on operating and 95% on storage
Efficiency: 63% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1 ms minimum
Leakage Current: Less than 0.75mA
MTBF: 100,000 hours on maximum load at +25° C degree
Dimensions (WxHxL): 150x86x140(mm)/5.9x3.4x5.5 inches
Features
-
Complied with EPS12V standard
-
Active Power Factor correction meeting with EN61000-3-2
-
High efficiency and reliability
-
Remote On/Off function
-
Internal 12V DC fan included
-
Noise Killer (Thermal fan speed control function)
-
Low noise and ripple
-
Complies with FCC part 15 subpart J class B and CISPR 22 Class B
-
Output over voltage, short circuit, and over current protection
-
100% Hi-pot, ATE, and burn-in tested
-
Re-settable power shut down
-
Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, Nemko (CB Report) and CE
