Description
Features
- Complied with Flex ATX and ATX12V standard
- Active power factor correction (PFC) meet EN61000-3-2
- High efficiency and reliability
- Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances)
- Remote ON/OFF function
- Internal 12V DC fan included Â
- Low noise and ripple
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
- Approved by : UL/CUL60950-1 2nd TUV EN60950-1 2nd, CB 60950-1 2nd , FCC, EMC
Specification:
- Temperature Range: Operating: 0 C ~ +25 C; storage & shipping: -20 C ~ +80 C
- Humidity: 5~95% on operating, 5~95% on storage
- Dielectric Withstand: Primary frame ground 1800V AC for 1 second
- Efficiency: Typical over 80%
- Rise time: less than 20ms
- Hold-up Time: 17ms minimum at nominal input voltage
- Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Less than 3.5mA at 264Vac, 50Hz
- MTBF: 100,000 hours on maximum load at +25 C
- Dimensions(LxWxH): 150×81.5×40.5mm /6×3.2×1.6inch
Â
Input Characteristics
Input Range: 99~132/ 180~264 Vac (RMS), Auto Range InputFrequency: 47 ~ 63Hz
Input Current: Max 2.5A(RMS) @ 115Vac, 1.5A(RMS) @ 230Vac
Inrush Current: No damageÂ
Output Characteristics
Â
Output Voltage | Min Load | Normal Load | Max Load | Load Reg. | Ripple & Noise |
+3.3V | 0.5A | 3A | 6.0A | 5% | 60mV P-P |
+5V | 0.3A | 3A | 6.0A | 5% | 60mV P-P |
+12V | 0.5A | 4A | 8.8A | 5% | 130mV P-P |
-12V | 0.0A | 0.1A | 0.3A | 10% | 130mV P-P |
+5Vsb | 0A | 1.0A | 1.5A | 5% | 60mV P-P |
Â
Â