Description
Specification
- Temperature Range: Operating: 0 C ~ +50 C on full load at 25 C, De-rate 2W/ C from 25 C to 50 C; storage & shipping: -20 C ~ +65
- storage & shipping: -20 C ~ +65
- Humidity: 5-95% on operating and storage
- Dielectric Withstand: Primary frame ground 1800V AC for 1 second
- Efficiency : 70% minimum measured at normal AC mains voltage and frequency with full load
- Rise Time : Less than 20ms
- Hold-Up Time : 17ms minimum at nominal input voltage
- Power Good Signal : Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Less than 3.5mA
- MTBF: 100,000 hours on maximum load at +25 C
- Dimensions (LxWxH):140x150x86mm/5.5×5.9×3.4inch
Features:
- Complied with ATX 12V standard
- High efficiency and reliability, low noise and ripple
- Compatible with European Union Directive 2002/95/EC(Restriction on Hazardous Substances).
- Remote ON/OFF function
- Internal 12V DC fan included
- Noise Killer (thermal fan speed control function)
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
- Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950 or VDE EN60950, NEMKO EN60950 (CB Report)
SEE DATA SHEET FOR INPUT & OUTPUT CHARACTERISTICS
