Description
Specification
- Temperature Range:Operating: 0 C ~ +50 C on full load; storage & shipping: -20 C ~ +80 C
- Humidity: 10-90% on operating, 95% on storage
- Dielectric Withstand: Primary frame ground 1800V AC for 1sec
- Efficiency: 82% minimum, typical up to 87%
- Rise Time: Less than 20ms
- Hold-Up Time : 17ms minimum at nominal input voltage
- Power Good Signal : Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Less than 3.5mA at 264Vac, 50Hz
- MTBF: 100,000 hours on maximum load at +25 C
- Dimensions (LxWxH):140x150x86mm / 5.5×5.9×3.4inch
Features:
- Complied with ATX12V standard
- Active Power Factor Correction Meeting with EN61000-3-2
- High efficiency and reliability
- Compatible with European Union Directive 2002/95/EC(Restriction on Hazardous Substances).
- Remote ON/OFF function
- Noise Killer (thermal fan speed control function)
- Low noise and ripple
- Internal 12V DC fan included
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
- Approved by CUL/UL60950-1 2nd TUV EN60950-1 2nd, CB 60950-1 2nd report, FCC, EMC
Output Characteristics
Â
| Output Voltage | Min Load | Normal Load | Max Load | Load Reg. | Ripple & Noise |
| +3.3V | 1.5A | 12A | 24A | 5% | 50mV P-P |
| +5V | 1.0A | 15A | 30A | 5% | 50mV P-P |
| +12V1 | 1.0A | 8A | 16A | 5% | 120mV P-P |
| +12V2 | 1.0A | 8A | 16A | 5% | 120mV P-P |
| +12V3 | 1.0A | 8A | 16A | 5% | 120mV P-P |
| +12V4 | 0.5A | 8A | 16A | 5% | 120mV P-P |
| -12V | 0.0A | 0.25A | 0.5A | 10% | 120mV P-P |
| +5Vsb | 0.1A | 2.0A | 4.0A | 5% | 50mV P-P |
* +3.3V and +5V total output not exceed 123W
* Maximum combined current for the +12V outputs shall be 36A
* +12V2 Peak current is 19A (less than 10m Sec.), minimum voltage during peak is >11.0Vdc.
*+5VsbPeakcurrentis 3.5A(lessthan500mSec.) , minimumvoltageduringpeakis>4.5Vdc.
Â
Â
