Description
Specification
- Temperature Range:Operating: Operating: +0 C ~ +40 C on full load Storage & Shipping: -40 C ~ +70 C
- Humidity: 5-85% on operating, 5-95% on storage
- Dielectric Withstand: Primary to frame ground 1800VAC for 1 second
- Efficiency: 87% minimum, typical up to 90%
- Rise Time: Less than 20ms
- Hold-Up Time : 17ms minimum at nominal input voltage
- Power Good Signal :Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Less than 3.5mA at 264Vac, 50Hz
- MTBF: 100,000 hours on maximum load at +25 C
- Dimensions (LxWxH):140x150x85.8mm / 5.5×5.9×3.4inch
Features:
- Complied with ATX12V / EPS12V standard
- Active Power Factor Correction Meeting with EN61000-3-2
- High efficiency and reliability
- Compatible with European Union Directive 2002/95/EC(Restriction on Hazardous Substances).
- Remote ON/OFF function
- Noise Killer (thermal fan speed control function)
- Low noise and ripple
- Internal 12V DC fan included
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
- Approved by CUL/UL60950-1, TUV EN60950-1,CB 60950-1 report, FCC, EMC
Input Characteristics
- Input Range: 90 ~ 264Vac (RMS), Full Range Input
- Frequency: 47 ~ 63Hz
- Input Current: Max 6A @ 115Vac, 3A@ 230Vac
- Inrush Current: No damage
Output Characteristics
Â
| Output Voltage | Min Load | Normal Load | Max Load | Load Reg. | Line Reg. | Ripple & Noise |
| +3.3V | 0.1A | 12A | 28/6A | 5% | 1% | 50mV P-P |
| +5V | 0.2A | 12A | 13.5/28A | 5% | 1% | 50mV P-P |
| +12V1 | 0.1A | 8A | 18A | 5% | 1% | 120mV P-P |
| +12V2 | 0A | 8A | 18A | 5% | 1% | 120mV P-P |
| +12V3 | 0A | 8A | 18A | 5% | 1% | 120mV P-P |
| +12V4 | 0A | 8A | 18A | 5% | 1% | 120mV P-P |
| -12V | 0A | 0.25A | 0.5A | 10% | 2% | 200mV P-P |
| +5Vsb | 0A | 1.5A | 3.5A | 5% | 1% | 50mV P-P |
* +12V1,2,3,4 Peak current is 20A (less than 10mS)
* +5Vsb peak current is 4A (less than 0.5S)
* +3.3V & +5V total output does not exceed 160W
  when +5V is loaded to 28A, then +3.3V maximum load is 6A
  when +3.3V is loaded to 28A, then +5V maximum load is 13.5A
*Â +12V1 & +12V2 & +12V3 & +12V4 total output does not exceed 672W(56A)
