Adjustable Tilt VESA Monitor Mount

$137.00

Compare
SKU: RVM-01 Category:

Description

The RVM-01 monitor mount allows easy installation of VESA 100mm mounting hole pattern monitors into 19″ EIA equipment racks. The EIA equipment racks can be two post or four post and the monitors can be of any size.The RVM-01 is manufactured of heavy guage powder coated welded steel and features easily adjustable friction nuts on each side.The adjustment allows for setting the monitor viewing angle and also allows the monitor to be tilted out of the way to access any equipment which may be mounted behind the monitor.


The RVM-01 only takes 1U(1.75″) of vertical rack space and my be mounted so the monitor tilts in the up or down direction.Mounting the monitor so it tilts in the down direction alows monitors with limited vertical viewing angles to be mounted higher in the rack then tilted down to allow for optimal viewing.If stationary equipment is installed in the rack(does not slide in/out) the RVM-01 can be mounted directly over the mounting holes on the stationary equipment and thus occupy no vertical rack space.

Additional information

Weight 10.00 lbs