- Temperature range: operating 0ï¿½C~40ï¿½C, storage -20ï¿½C~80ï¿½C
- Hold up time: 16mS min. at full load & 115 input voltage
- Dielectric withstand: Input/Output 1500 VAC for 1 min., input to frame ground 1500 VAC for 1 min.
- Efficiency: 84% / 85% MAX. typical at full load
- Power good signal: on delay 100mS to 500mS off delay 1Ms
- Over power protection: 110-150% max
- Over voltage protection: +5V->5.8~6.9V, +3.3V->3.9~4.6V, +12V->13.9~16.4V
- Short circuit protection: +12V, -12V, +3.3V, +5V, +5VSB
- EMI: FCC CLASS A, CISPR 22 CLASS A
- Safety: meet UL60950, CSA 22.2 NO.60950-1-03 1ST Edition, TUV IEC 60950-1, CCC
- Warning method: LED, BUZZER, TTL SIGNAL
- Meet IEC-1000-3-2 CLASS D (Active PFC)
- Hot-swappable/hot pluggable redundancy function
- Cooling: One 40mm DC fans (module)
- AC inlet in each module
* The Power Supply is for chassis assembly only and is not allowed to be operated as stand-alone component. Final assembly has to comply with corresponding EMC and safety-regulations.
Best Solution for
- Storage system
AC Input Spec
- Voltage: 90-264VAC full range
- Frequency: 47-63HZ
- Input current: 3A (RMS) for high range input voltage, 6A (RMS) for low range input voltage
- Inrush current: 20A max. for 132 VAC per module 40A max for 264 VAC per module
DC Output Spec
Output Current Min.
Output Current Max.
Output Ripple & Noise Max.[P-P]