Description
Specifications
|
Output Voltage |
Output Current Min. |
Output Current Max. |
Output Current Peak |
Regulation Load |
Regulation Line |
Output Ripple & Noise Max.[P-P] |
5V |
3 |
25.00 |
|
� 5% |
� 1% |
50mV |
|
|
|
12V |
2 |
40.00 |
|
� 5% |
� 1% |
120mV |
|
|
|
-5V |
0 |
0.50 |
|
� 5% |
� 1% |
120mV |
|
|
|
-12V |
0 |
0.50 |
|
� 5% |
� 1% |
120mV |
|
|
|
3.3V |
1 |
20 |
|
� 5% |
� 1% |
50mV |
|
|
|
+5VSB |
0.1 |
20 |
|
� 5% |
� 1% |
50mV |
|
|
|
Features
* TEMPERATURE RANGE：OPERATING 0℃~40℃
* HOLD UP TIME：16mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE
* DIELECTRIC WITHSTAND：INPUT/OUTPUT 1500 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND
* EFFICIENCY：65% TYPICAL，AT FULL LOAD
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS
* OVERLOAD PROTECTION：110~150% MAX
* OVER VOLTAGE PROTECTION：+5V-5.7V~6.5V , +3.3V-3.7V~4.1V , +12V-13.3V~14.3V
* SHORT CIRCUIT PROTECTION：+5Vã€-5Vã€+12Vã€-12Vã€+3.3V
* EMI NOISE FILTER : FCC CLASS B, CISPR22 CLASS B
* SAFETY : UL 1950, CSA 22.2 NO 950, TUV IEC 950
* REMOTE ON/OFF CONTROL
THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY).
AS LOGIC LEVEL IS LOW，OUTPUTS VOLTAGE WERE ENABLE， AS LOGIC LEVEL IS HIGH，OUTPUTS VOLTAGE WERE DISABLE.
* 3.3V / 5V REMOTE SENSING
* COOLING : TWO 40mm DC FANS
* MEET IEC-1000-3-2 CLASS D
