EMACS 1U 500W Power Module

Description

Specifications

INPUT CHARACTERISTICS:
VOLTAGE: 90 ~ 264 VAC FULL RANGE
FREQUENCY: 47 ~ 63 HZ
INPUT CURRENT:
8.0 A ( RMS ) FOR 115VAC
4.0 A ( RMS ) FOR 230VAC
INRUSH CURRENT:
60.0A MAX. FOR 115 VAC
100.0A MAX. FOR 230 VAC

OUTPUT CHARACTERISTICS:

OUTPUT VOLTAGE	OUTPUT CURRENT		REGULATION		OUTPUT RIPPLE & NOISE MAX. [P-P]
OUTPUT VOLTAGE	MIN.[A]	MAX.[A]	LOAD	LINE	OUTPUT RIPPLE & NOISE MAX. [P-P]
+5V	3.5	30.0	ï¿½ 5%	Â ï¿½50mV	50mV
+12V	2.0	32.0	ï¿½ 6%	Â ï¿½50mV	120mV
Â Â Â Â Â Â Â +5V	Â Â Â Â 0.05	Â Â Â Â Â Â 0.7	Â Â Â +5%, -10%	Â ï¿½50mV	Â Â Â Â Â Â Â 120mV
-12V	Â Â Â Â 0.05	0.7	+5%, -10%	Â ï¿½50mV	120mV
+3.3V	1.0	24.0	ï¿½ 5%	Â ï¿½50mV	70mV
+5VSB	Â Â Â Â 0.1	Â Â Â Â Â Â 2.0	+5%, -6%	Â ï¿½50mV	70mV

SPECIFICATION:

TEMPERATURE RANGE: OPERATING 0⁰C — 40⁰C; STORAGE -20⁰C — 80⁰C
Â HUMIDITY: OPEREATING: 20%-95%; NON-OPERATING: 10%-95%
HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 SECOND
INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND
EFFICIENCY: 65% TYPICAL, AT FULL LOAD
POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
OVER LOAD PROTECTION: 110~180%
OVER VOLTAGE PROTECTION: +5V (5.7V ~ 6.5V), 3.3V (3.9V ~ 4.7V)
SHORT CIRCUIT PROTECTION: +5V, -5V, +12V, -12V, +3.3V
EMI NOISE FILTER: FCC CLASS A, CISPR2 CLASS A
SAFETY: UL 1950, CSA 22.2 NO/ 950, TUV IEC 950
REMOTE ON / OFF CONTROL

THE UNIT SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH

WILL DISABLE / ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V

STANDBY),

AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE,

AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABLE.

COOLING: ONE 38mm DC FAN

Additional information

Weight	6.00 lbs
Dimension	265.30×98.40×40.00 (mm) / 10.44×3.87×1.57 (inch)
Front Cooling	1 x 38mm DC FANS
Input Voltage	90 ~ 264 VAC FULL RANGE
Output Wattage	500W
Manufacturer	EMACS

EMACS 1U 500W Power Module

Description

Additional information

Related products