Description
Specifications INPUT CHARACTERISTICS:
VOLTAGE: 90 ~ 264 VAC FULL RANGE
FREQUENCY: 47 ~ 63 HZ
INPUT CURRENT:
9.0 A ( RMS ) FOR 115VAC
4.5Â A ( RMS ) FOR 230VAC
INRUSH CURRENT:
65.0A MAX. FOR 115 VAC
125.0A MAX. FOR 230 VAC
OUTPUT CHARACTERISTICS:
OUTPUT VOLTAGE OUTPUT CURRENT REGULATION OUTPUT RIPPLE & MIN.[A] MAX.[A] LOAD LINE +5V 1.5 24.0 � 5%  �50mV 70mV +12V1 1.0 16.0 � 6% �50mV 120mV +12V2 1.0 26.0 � 6%  �50mV 120mV  �50mV -12V 0.7 +5%-10%  �50mV 120mV +3.3V 1.0 24.0 � 5% �50mV 70mV +5VSB       2.0 +5%, -6% �50mV 70mV SPECIFICATION: * TEMPERATURE RANGE: OPERATING 00C – 400C * HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
NOISE MAX. [P-P]
       –5V
    0.05
      0.7
    +5%-10%
       120mV
    0.05
    0.1
* REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
* HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
* DIELECTRIC WITHSTAND: INPUT/OUTPUT 1500 VAC FOR 1 SECOND
INPUT TO FRAME GROUND 1500VAC FOR 1 SECOND
* EFFICIENCY: 67% TYPICAL AT 115VAC FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100ms TO 500ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110%~170%
* OVER VOLTAGE PROTECTION: +5V-5.7V~6.5V, 3.3V-3.9V~4.7V, +12V-13.3V~14.3V
* OVER CURRENT PROTECTION: 110%~160%
* SHORT CIRCUIT PROTECTION: +5V, -5V, +12V, -12V, +3.3V, +5VSB
* EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A
* SAFETY: UL 1950, CSA 22.2 NO/950, TUV IEC 950
* REMOTE ON / OFF CONTROL
THE UNIT SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE(EXCLUDEE +5V STANDBY), AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE, AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABLE.
* 3.3V/5V REMOTE SENSING
* COOLING: 40mm DC FAN
