Description
Features
- Temperature range: Operating 0 J-40 J
- Hold up time: 16mS min at full load & Nominal input voltage
- Dielectric withstand: input/output 1800 VAC for 1 second input to frame ground 1800 VAC for 1 second
- Efficiency: 83% typical at 115VAC , full load
- Power good signal: on delay 100mS to 500mS; off delay 1mS
- Over power protection: 110-160% max
- Over voltage protection: +5V->5.6V/6.6V +3.3V->3.6V/4.3V +12V13.2V/15V
- Short circuit protection: +5V/ +12V / +3.3V
- EMI Noise filter : FCC CLASS A, CISPR22 CLASS A
- Safety : To meet UL, CUL, TUV
- Remote on/off control the power supply shall accept a logic open collector level which will disable/enable all the output voltage (Exclue +5V stand by). As logic levelsi low; output voltage were enable/ as logic level is high / output voltage were disabled.
- 3.3V & 5V Remote sensing
- Cooling: One 40mm DC Fans
- Meet IEC-1000-3-2 CLASS D
- Connectors: 24P+4P:570+8
Best Solution for
- Server
- Workstation
- Storage system
- IPC
AC Input Spec
- Voltage: 90-264 VAC full range
- Frequency: 47-63HZ
- Input current: 6A (RMS) for 115 VAC/ 3A (RMS) for 230 VAC
- Inrush current: 40A max. for 115 VAC/ 60A MAX. for 230 VAC
DC Output Spec
| Output Voltage | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 1 | 22 | 5% | 1% | 70mV |
| +12V | 1 | 32 | 5% | 1% | 120mV |
| -12V | 0.1 | 0.8 | 10% | 1% | 120mV |
| +3.3V | 1 | 22 | 5% | 1% | 70mV |
| +5VSB | 0.1 | 3.5 | 5% | 1% | 70mV |
