Description
Features
- Temperature range: operating 0¢J-40¢J, storage: -20¢J – 80¢J
- Hold up time: 16mS min at full load & nominal input voltage
- Dielectric withstand: input/output 1500 VAC for 60 second input to frame ground 1500 VAC for 60 second
- Efficiency: typical >80% at 115VAC, 20%~100% max load
- Power good signal: on delay 100mS to 500mS
- Over power protection: 110% ~ 160%
- Over voltage protection: +5V->5.9V/6.7V, +12V->13.0V/15.0V, +3.3V->3.9V/4.3V short
- Short circuit protection: +5V, +3.3V, +12V, -12V, auto-recovered: +5VSB
- Over current protection: +3.3V: 27.5~37.5A, +5V: 27.5~37.5A, +12V: 51.7~70.5A
- EMI noise filter: FCC CLASS B, CISPR22 CLASS B
- Safety: TO MEET UL, CUL, TUV
- Remote on/off control
- The power supply shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5V standby).
- As logic level is low; output voltage were enable: as logic level is high: output voltage were disable.
- N+1 Redundancy function
- Hot-swappable function
- Current/balance load sharing design
- +3.3V Remote sensing
- Isolation: built-in in power module
- Power factor correction: Active (Meet IEC-1000-3-2)
- Cooling: 40mm DC fans (one module)
- Dimension: 276(D) 101(W) 82(H) mm
- Connectors: (20P+A4):630mm
Best Solution for
- Server
- Workstation
- Storage syste
AC Input Spec
- Voltage: 90-264VAC full range
- Frequency: 47-63HZ
- Input current: 8A/4A (115 / 230 VAC) power module
- Inrush current: 60A/80A max for 115/230 VAC power module
DC Output Spec
| Output Voltage | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
| +5V | 0.5 | 25 | ±5% | ±1% | 50mV |
| +12V | 2 | 47 | ±5% | ±1% | 120mV |
| -12V | 0.2 | 0.8 | ±10% | ±1% | 150mV |
| +3.3V | 0.5 | 25 | ±5% | ±1% | 50mV |
| +5VSB | 0.1 | 3.5 | ±5% | ±1% | 50mV |
