Emacs 2U High Efficiency 500W EPS-12V Power Supply

$195.00

Add to Wishlist
Compare
SKU: P2H-5500V Category:

Description

Specifications

INPUT CHARACTERISTICS:
VOLTAGE: 90 ~ 264 VAC  FULL RANGE
FREQUENCY: 47 ~ 63 HZ
INPUT CURRENT:
6.0 A ( RMS ) FOR 115VAC
3.0 A ( RMS ) FOR 230VAC
INRUSH CURRENT:
40.0A MAX. FOR 115 VAC
60.0A MAX. FOR 230 VAC

DC OUTPUT SPEC:

OUTPUT

VOLTAGE

OUTPUT CURRENT

REGULATION

OUTPUT RIPPLE &
NOISE MAX. [P-P]

MIN.[A]

MAX.[A]

LOAD

LINE

+5V

1

25

± 5%

± 1%

70mV

+12V

1

40

± 5%

± 1%

120mV

 

 

 

 

 

12V

     0.1

0.8

-10%~+10%

± 1%

120mV

+3.3V

1

25

± 5%

± 1%

70mV

+5VSB

     0.1

      3.5

± 5%

± 1%

70mV

 

SPECIFICATION:

TEMPERATURE RANGE: OPERATING 00C — 400C

HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE

DIELECTRIC WITHSTAND: INPUT / OUTPUT 1800 VAC FOR 1 SECOND

INPUT TO FRAME GROUND 1800 VAC FOR 1 SECOND

EFFICIENCY: 83% TYPICAL AT 115VAC, FULL LOAD

POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms

OVER LOAD PROTECTION: 110 +/- 160%

OVER VOLTAGE PROTECTION: +5V (5.6V ~ 6.6V), 3.3V (3.6V ~ 4.3V)

SHORT CIRCUIT PROTECTION: +5V, -5V, +12V, -12V, +3.3V

EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A

SAFETY : TO MEET UL, CUL, TUV

REMOTE ON/OFF CONTROL THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY). AS LOGIC LEVEL IS LOW¡AOUTPUTS VOLTAGE WERE ENABLE¡A AS LOGIC LEVEL IS HIGH¡AOUTPUTS VOLTAGE WERE DISABLE.

 COOLING: ONE 40mm DC FAN

 MEET IEC-1000-3-2 CLASS D

 

 CONNECTORS: (20P+A4)+8P

 

Additional information

Weight 5.00 lbs
Dimension

215.00×100.00×70.00 (mm) / 8.46×3.94×2.76 (inch)
Input Voltage

90 ~ 264 VAC FULL RANGE
Output Wattage

500W
Manufacturer

EMACS

Related products