Description
Features
- Temperature range: operating 0¢J-40¢J
- Hold up time: 16mS min at full load & nominal input voltage
- Dielectric withstand: input/output 1500 VAC for 60 second input to frame ground 1500 VAC for 60 second
- Efficiency: 82% typical at 115VAC, full load
- Power good signal: on delay 100mS to 500mS
- Over power protection: 110% ~ 160%
- Over voltage protection: +5V->5.9V/6.7V¡B+12V->13.0V/15.0V, +3.3V->3.9V: 4.3V short circuiti protection: shut down adn latch off
- EMI noise filter: FCC CLASS B, CISPR22 CLASS B
- Safety: TO MEET UL, CUL, TUV
- Remote on/off control
- The power supply shall accept a logic open collector level which will disable/enable all the output voltage (exclude +5V standby). As logic level is low: output voltage were enable: as logic level is high: output voltage were disabled.
- N+1 Redundancy function
- Hot-swappable function
- Current/balance load sharing design
- +3.3V Remote sensing
- Isolation: built-in in power module
- Power factor correction: Active (Meet IEC-1000-3-2)
- Cooling: 40mm DC fans (one module)
- Connectors: (20P+A4)+8P
Best Solution for
- Server
- Workstation
- Storage system
AC Input Spec
- Voltage: 90-264VAC full range
- Frequency: 47-63HZ
- Input current:8A/4A (115 / 230 VAC) power module
- Inrush current: 40A/60A max. for 115/230 VAC power module
DC Output Spec
Output Voltage | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
+5V | 1 | 32 | ±5% | ±1% | 50mV |
+12V | 3 | 88 | ±5% | ±1% | 120mV |
-12V | 0.1 | 1.2 | ±5% | ±1% | 150mV |
+3.3V | 1 | 32 | ±5% | ±1% | 50mV |
+5VSB | 0.3 | 4 | ±5% | ±1% | 50mV |