I-STAR 1U 600W High Efficiency Power Supply

$175.00

Compare
SKU: SS-1U60EL Category:

Description

Specification



  • AC Input Voltage Range: 100VAC ~ 240VAC, +/-10%, 47 to 63 Hz.
  • INPUT CURRENT:10.0 A ( RMS ) FOR 115VAC /5.0 A ( RMS ) FOR 230VAC.
  • Input Power Factor: The minimum power factor at full load shall be 0.98/115V 60 Hz and 0.95/230V 50 Hz
  • Inrush current: 35A MAX. FOR 115 VAC / 55A MAX. FOR 230 VAC.
  • DC Output: 600W maximum

Features:



  • DIMENSION: D225 X W100 X H40.5mm
  • COOLING: ONE 40mm DC FANS.
  • TEMPERATURE RANGE: Operation 0℃~45℃
  • HOLD UP TIME: 16ms at maximum load & normal input voltage
  • EFFICIENCY: TYPICAL >80% AT 115VAC, FULL LOAD.
  • ATX 12V / EPS 12V
  • POWER GOOD SIGNAL: PW-OK is power good signal and should be asserted high by the Power Supply to indicate that +5VDC and +3.3VDC output are above the under voltage thresholds of the Power Supply TTL. compatible signal out with 100ms to 500ms
  • OVER POWER PROTECTION: The Power Supply shall shut down when output power exceeds 110﹪to 160﹪ of full load and require a power on cycle be performed by the operate
  • OVER VOLTAGE PROTECTION: Standard on +5.0V, set at 6.5VDC ± 0.75VDC
  • SHORT CIRCUIT PROTECTION: A short circuit placed between the DC return and the output shall cause no damage and the power supply shall shutdown
  • EMI: FCC CLASS B, CISPR22 CLASS B.
  • AGENCY APPROVALS: TO MEET UL, CUL, TUV
  • MTBF: 100,000 hours

Output Voltage:

















































OUTPUT VOLTAGE OUTPUT CURRENT REGULATION OUTPUT
MIN ( A ) MAX ( A ) LOAD

LINE

RIPPLE & NOISE
MAX. [ P-P ]
+5V 0.5 25 ±5% ±1% 60mV
+12V 2 48 ±5% ±1% 120mV
-12V 0 0.8 ±5% ±1% 120mV
+3.3V 0.5 25 ±5% ±1% 60mV
+5VSB 0.1 3.5 ±5% ±1% 60mV

Additional information

Weight 6.00 lbs
Input Voltage

100VAC ~ 240VAC

Output Wattage

600W

Dimension (D x W x H)

225 x 100 x 40.5mm

Manufacturer

I-STAR