Description
Specification
- AC Input Voltage Range: 100VAC ～ 240VAC, +/-10%, 47 to 63 Hz.
- INPUT CURRENT:10.0 A ( RMS ) FOR 115VAC /5.0 A ( RMS ) FOR 230VAC.
- Input Power Factor: The minimum power factor at full load shall be 0.98/115V 60 Hz and 0.95/230V 50 Hz
- Inrush current: 35A MAX. FOR 115 VAC / 55A MAX. FOR 230 VAC.
- DC Output: 700W maximum
Features:
- DIMENSION: D225 X W100 X H70mm
- COOLING: By forced air.
- TEMPERATURE RANGE: Operation 0℃~45℃
- HOLD UP TIME: 16ms at maximum load & normal input voltage
- EFFICIENCY: TYPICAL >80% AT 115VAC, FULL LOAD.
- ATX 12V / EPS 12V
- POWER GOOD SIGNAL: PW-OK is power good signal and should be asserted high by the Power Supply to indicate that +5VDC and +3.3VDC output are above the under voltage thresholds of the Power Supply TTL. compatible signal out with 100ms to 500ms
- OVER POWER PROTECTION: The Power Supply shall shut down when output power exceeds 110﹪to 160﹪ of full load and require a power on cycle be performed by the operate
- OVER VOLTAGE PROTECTION: Standard on +5.0V, set at 6.5VDC ± 0.75VDC
- SHORT CIRCUIT PROTECTION: A short circuit placed between the DC return and the output shall cause no damage and the power supply shall shutdown
- EMI: FCC CLASS B, CISPR22 CLASS B.
- AGENCY APPROVALS: TO MEET UL, CUL, TUV
- MTBF OF POWER SUPPLY ELECTRONNIS: 100,000 hours at 25℃ 75% loading.
Output Voltage:
</TABLE< body>
| OUTPUT VOLTAGE | OUTPUT CURRENT | REGULATION | OUTPUT | ||
| MIN ( A ) | MAX ( A ) | LOAD | LINE | RIPPLE & NOISE MAX. [ P-P ] |
|
| +5V | 0.5 | 25 | ±5% | ±1% | 60mV |
| +12V | 2 | 56 | ±5% | ±1% | 120mV |
| -12V | 0 | 0.8 | ±5% | ±1% | 120mV |
| +3.3V | 0.5 | 25 | ±5% | ±1% | 60mV |
| +5VSB | 0.1 | 3.5 | ±5% | ±1% | 60mV |
