I-STAR 3U 1350W 2+1 Hot-Swap Redundant Power Supply

I-STAR 3U 1350W 2+1 Hot-Swap Redundant Power Supply

$770.00

Add to Wishlist

SKU: TC-1350RVN3 Category: I-STAR

Description
Additional information

Description

AC Input

Input Voltage: 100~ 240VAC,±10%
Input Curr ent: 12A For 115VAC,6A For 230VAC
Input Frequency: 47Hz~63Hz
Power Fa ctor: >0.96@230VAC/50Hz,full load

Features

Universal AC input /Full range
Active power factor Correction
Protections:Over Power/Over Voltage/Short Circuits
Current Sharing design on +3.3V, +5V and +12V
Front panel LED to Indicate Power Status
Power Fault Alarm Signals
Alarm Reset
100% burn-in test

Protections
Over Power: 110%~150% rated output power
Over Voltage: +5V→5.7V~6.5V,+3.3V→3.7V~4.1V,+12V→12.8V~13.9V
Short Circuit: Shut down o/p voltage, re-power on to recover

Function
Power Good Signal: 100ms~500ms, TTL compatible signal
Power Fail Delay: >1msec. ,TTL compatible signal
PS-ON: Power off:PS-ON = 2V min. ;Power on:PS-ON = 0.8V max.

Environmental
Operating Temperature: 0˚C to 45˚C
Storage Temperature: -20˚C to +70˚C
Operating Humidity: 20% to 90%,non-condensing
Storage Humidity: 5% to 95%, non-condensing

Safety & EMI/RFI
Safety Standards: UL,cUL,TUV,CB
EMI/RFI Standards: CISPR22(EN55022) Class A, FCC Part15 Class A

Others
MTBF: >100,000 hours
Coolings: 38x38x28mmx6 DC FANS
Dimension(DxWxH): 300x101x125mm

Output

Output Voltage	Output Current				Regulation		Output Ripple & Noise Max.(p-p)
	TC-1350RVN3
	Min.			Max.	LOAD	LINE
+5V	3A			60A	5%	1%	50mV
+3.3V	3A			47A	5%	1%	50mV
+12V	4.5A			98A	5%	1%	70mV
-12V	0A			1.5A	5%	1%	70mV
+5VSB	0.3A			3A	5%	1%	50mV
Efficiency		72% Typical at full load
HoldupTime		16m sec. minimum, at full load
REMARKS:		1.Total Max output of +5V AND +3.3V not exceed 400W
		2.Power module Total output power not exceed 1350W for TC-1350RVN3.
		3.Noise bandwidth is from DC to 20MHz.

Additional information

Weight	25.00 lbs
Manufacturer	I-STAR