Description
Specification
Temperature Range: Operating: 0 C ~ +50 C; storage & shipping: -20 C ~ +80 C
Humidity: 85% on operating, 95% on storage
Dielectric Withstand: Primary frame ground 1800V AC for 1 second
Efficiency : 68% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
Rise Time : Less than 20ms
Hold-Up Time : 17ms minimum at nominal input voltage
Power Good Signal : Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible) (TTL and CMOS compatible)
Leakage Current: Not exceed 3.5mA at 264Vac, 50Hz
MTBF: 100,000 hours on maximum load at +25 C
Dimensions (LxWxH): 150×81.5×40.5mm /6×3.2×1.6inch
Â
Features
Complied with Flex ATX and ATX12V standard
Active Power Factor Correction (PFC) meet EN61000-3-2
High efficiency and reliability
Noise Killer (thermal fan speed control function)
Low noise and ripple
Internal 12V DC fan included
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances).
Re-settable power shut down
Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
Approved by CUL/UL60950-1, TUV EN60950-1 , NEMKO EN60950-1 (CB Report) CE
