Description
Specification
- Temperature Range:Operating 0 C ~ +25 C on 250W output load or 0 C ~ +50 C on 220W output load ; storage & shipping -20 C ~ +80 C
- Humidity: 5 ~ 90% on operating, 5 ~ 95% on storage
- Dielectric Withstand: Primary frame ground 1800V AC for 1sec
- Efficiency: 80%minimum, typical up to 87%
- Rise Time: Less than 20ms
- Hold-Up Time : 17ms minimum at nominal input voltage
- Power Good Signal : Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Less than 3.5mA at 264Vac, 50Hz
- MTBF: 100,000 hours on maximum load at +25 C
- Dimensions (LxWxH):150×81.5×40.5mm /6×3.2×1.6inches
Features:
- Complied with EPS12V and ATX12V standard
- Active Power Factor Correction Meeting with EN61000-3-2
- High efficiency and reliability
- Compatible with European Union Directive 2002/95/EC(Restriction on Hazardous Substances).
- Remote ON/OFF function
- Noise Killer (thermal fan speed control function)
- Low noise and ripple
- Internal 12V DC fan included
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Complies with FCC part 15 subpart J class B 115Vac operation,and CISPR 22 class B at 230Vac operation
- Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950 or VDE EN60950, NEMKO EN60950 (CB Report) CE
