Description
Specification
- Temperature Range:Operating: 0 C ~ +50 C on full load; storage & shipping: -20 C ~ +80 C
- Humidity: 85% on operating, 95% on storage
- Dielectric Withstand: Primary frame ground 1800V AC for 1 second
- Efficiency: typical up to 86%
- Rise Time: Less than 20ms
- Hold-Up Time : 20ms minimum at nominal input voltage
- Power Good Signal :Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Not exceed 3.5mA at 264Vac, 50Hz
- MTBF: 100,000 hours on maximum load at +25 C
- Dimensions (LxWxH):220x100x40.5mm /8.7×3.9×1.6inch
Features:
- Complied with ATX12V / EPS12V standard
- Active Power Factor Correction Meeting with EN61000-3-2
- High efficiency and reliability
- Compatible with European Union Directive 2002/95/EC(Restriction on Hazardous Substances).
- Remote ON/OFF function
- Noise Killer (thermal fan speed control function)
- Low noise and ripple
- Internal 12V DC fan included
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
- Approved by UL,CSA or CuL 60950-1, TUV or VDE, EMC,FCC,CE, CB report.
